How To Fix Kenmore Sewing Machine Model 3859 min read

Reading Time: 6 minutes

how to fix kenmore sewing machine model 385

If your Kenmore sewing machine model 385 isn’t working properly, don’t worry – it’s usually easy to fix. Here are some tips on how to do it:

1. Make sure the machine is unplugged before you start.

2. Check to see if the bobbin is loaded correctly. The bobbin should be loaded with thread so that the thread comes out of the hole at the top.

3. If the thread is coming out of the wrong hole, you may need to adjust the tension. You can do this by turning the knob on the side of the machine.

4. If the machine is skipping stitches, the needle may be too high or too low. You can adjust the needle height by turning the knob on the side of the machine.

5. If the machine is making a loud noise, the belt may need to be replaced. You can replace the belt by following the instructions in the manual.

6. If the machine is still not working properly, you may need to take it to a repair shop.

How do I service my Kenmore sewing machine?

Servicing a Kenmore sewing machine is not difficult, but it is important to follow the correct sequence of steps to avoid damaging the machine. The first step is to unplug the machine and remove the fabric from the needle. If the fabric is caught in the needle, use a pair of pliers to loosen it. Next, remove the screws that hold the cover in place and remove the cover. Be careful not to lose the screws, as they are small and easy to lose.

Once the cover is removed, you will see the bobbin case and the bobbin. The bobbin case is the metal casing that the bobbin is housed in. The bobbin is the small, spool-shaped object that the thread is wound around. To remove the bobbin case, hold it in one hand and use the other hand to turn the knob on the side of the machine. This will loosen the bobbin case. Once the case is loose, pull it out of the machine.

Next, remove the screws that hold the bobbin cover in place and remove the cover. This will expose the bobbin winder. The bobbin winder is the small, metal cylinder on the side of the machine. To remove the bobbin winder, hold it in one hand and use the other hand to turn the knob on the top of the machine. This will loosen the bobbin winder. Once the winder is loose, pull it out of the machine.

SEE ALSO:  How To Fix Negative Accounts Payable In Quickbooks

Now that the bobbin winder is removed, you can remove the bobbin. To do this, hold the bobbin in one hand and use the other hand to turn the knob on the top of the bobbin winder. This will loosen the bobbin. Once the bobbin is loose, pull it out of the bobbin winder.

Next, remove the screw that holds the needle in place and remove the needle. Be careful not to lose the screw. Now you can remove the bobbin case. To do this, hold the bobbin case in one hand and use the other hand to turn the knob on the side of the machine. This will loosen the bobbin case. Once the case is loose, pull it out of the machine.

Now that the bobbin case is removed, you can remove the bobbin. To do this, hold the bobbin in one hand and use the other hand to hold the needle. Now, use the hand that is holding the needle to pull the bobbin out of the bobbin case.

Now that the bobbin is removed, you can thread the machine. To do this, hold the thread in one hand and use the other hand to insert it into the small hole on the side of the machine. Once the thread is in the hole, pull it down into the machine. Now, hold the thread in one hand and use the other hand to hold the needle. Now, use the hand that is holding the needle to insert the needle into the small hole on the side of the machine. Once the needle is in the hole, pull it up into the machine.

Now, hold the thread in one hand and use the other hand to hold the needle. Now, use the hand that is holding the needle to insert the needle into the small hole on the side of the machine. Once the needle is in the hole, pull it up into the machine. Now, hold the thread in one hand and use the other hand to hold the needle. Now, use the hand that is holding the needle to insert the needle into the small hole on the side of the machine. Once the needle is in the hole, pull it

How old is a Kenmore 385 sewing machine?

The Kenmore 385 sewing machine is a reliable machine that has been manufactured for a number of years. It is a basic machine that is easy to use and perfect for a beginner sewer.

SEE ALSO:  How To Fix Mac Screen Flickering

The Kenmore 385 sewing machine was first manufactured in the early 1990s. It is a basic machine that is perfect for a beginner sewer. It is easy to use and reliable.

The Kenmore 385 sewing machine has been discontinued and is no longer being manufactured. However, it is still a popular machine and can be found online and in stores.

The Kenmore 385 sewing machine is a basic machine that is perfect for a beginner sewer. It is easy to use and reliable. It has been discontinued, but can still be found online and in stores.

Why is my Kenmore sewing machine not stitching?

If you are having trouble getting your Kenmore sewing machine to stitch correctly, there could be a few different reasons why. In this article, we will go over some of the most common causes of this problem, as well as how to fix it.

One of the most common reasons why a Kenmore sewing machine may not be stitching correctly is because the thread is not being fed properly. This can often be caused by a tangled or jammed thread, or by a dirty bobbin case. If you are having this problem, make sure to clean out the bobbin case and remove any tangled or jammed thread.

Another common reason why a sewing machine may not be stitching correctly is because the needle is not positioned correctly. If the needle is not in the correct position, it can cause the fabric to bunch up and the stitches to come out uneven. To fix this, make sure to adjust the needle position according to the type of fabric you are sewing.

If you are still having trouble getting your sewing machine to stitch correctly, it may be time to take it in for servicing. Often, a simple tune-up can fix any minor problems that may be causing your machine to not stitch correctly.

How do I fix the tension on my Kenmore sewing machine?

If the tension on your Kenmore sewing machine is not correct, the stitches will be either too tight or too loose. You can adjust the tension by turning the tension knob on the machine. If the tension is too tight, turn the knob counterclockwise. If the tension is too loose, turn the knob clockwise.

Can I service my sewing machine myself?

Can I service my sewing machine myself?

Yes, you can service your sewing machine yourself. However, you should be aware that there is a risk of injury if you are not familiar with the machine. You should also be aware that there are specific tools and parts that are necessary to service a sewing machine.

SEE ALSO:  How To Fix A Slow Close Toilet Seat

If you are not familiar with the machine, it is best to take it to a professional. They will be able to service it properly and ensure that it is in good working order.

How do you fix a sewing machine that won’t sew?

There are a few things you can do to try and fix a sewing machine that is not sewing correctly. The first thing you should do is clean the machine. You can do this by taking the bobbin case out and spraying it with a compressed air can. You can also clean the needle plate, the feed dog, and the throat plate with the compressed air.

If the machine is still not sewing correctly, you may need to replace the bobbin case, the needle, or the belt. If the machine is still not sewing correctly after you have replaced these parts, you may need to take it to a repair shop.

Are old Kenmore sewing machines good?

Are old Kenmore sewing machines good?

Kenmore sewing machines are some of the most popular machines on the market, and they have been around for many years. While the newer models are undoubtedly better in many ways, the older machines can still be good options for those who are looking for a quality machine at a budget-friendly price.

One of the biggest benefits of an older Kenmore machine is that they can often be found at a lower price than the newer models. This is because the newer machines have more features and are often more complex, which means they can be more expensive to produce. If you are looking for a basic sewing machine that can do the basics, an older Kenmore model is a good option.

Another benefit of the older machines is that they can be more reliable than the newer models. This is because the newer machines often have more features, which can lead to more problems. The older machines may not have all of the features that the newer machines have, but they are more likely to work properly and without problems.

While the older machines may not have all of the features of the newer machines, they often have features that are still useful today. For example, the older machines often have a stronger motor, which can be helpful for sewing through thicker fabrics. They also often have a larger sewing space, which can be helpful for larger projects.

Overall, the older Kenmore sewing machines are still good options for those who are looking for a quality machine at a budget-friendly price. They may not have all of the features of the newer machines, but they often have features that are still useful today.

Leave a Reply

Your email address will not be published.