How To Fix Inaccessible Boot Device6 min read

Reading Time: 4 minutes

how to fix inaccessible boot device

Inaccessible Boot Device is an error that can occur on Windows 10 PCs. It can prevent the PC from starting up, and you’ll see a message like “We couldn’t start Windows. A recent hardware or software change might be the cause.”

There are a few ways to fix this problem, and we’ll show you how to do them.

The first thing you should try is restarting your PC. If that doesn’t work, you can try booting into Safe Mode.

If you’re still having problems, you can try using the Windows 10 Recovery Drive to fix the problem.

Finally, if all else fails, you can try reinstalling Windows 10.

We’ll show you how to do all of these things.

What causes inaccessible boot device?

What causes inaccessible boot device?

There are many possible causes for an inaccessible boot device, but some of the most common include:

1) A corrupted system file

2) A faulty driver

3) A hardware malfunction

In some cases, an inaccessible boot device may be caused by a virus or other malware infection.

If your computer is unable to boot properly, you may see a message like this:

“Inaccessible Boot Device.”

There are several things you can do to try to fix the problem:

1) Check to make sure that all of your cables are properly connected.

2) Run a virus scan to check for any malware infections.

3) Repair any corrupted system files.

4) Update your drivers.

SEE ALSO:  How To Fix Crumbly Pie Dough

5) Check your hardware for any defects.

If you are still unable to fix the problem, you may need to take your computer to a professional for further assistance.

How do I fix inaccessible boot device in BIOS?

What to do if your computer can’t start and you see an inaccessible boot device error?

If you can’t start your computer and you see an inaccessible boot device error, there are a few things you can try:

-Restart your computer: Sometimes this is all you need to do to fix the problem.

-Update your BIOS: If restarting your computer doesn’t work, you may need to update your BIOS. You can find the latest BIOS updates on the manufacturer’s website.

-Check your hard drive: Make sure your hard drive is properly connected to your computer and that it’s not damaged.

How do I fix inaccessible boot device reboot loop?

Inaccessible boot device reboot loop is a problem that can occur on Windows 10 computers. This problem can cause the computer to freeze or reboot repeatedly. In order to fix this problem, you will need to use the Windows 10 recovery options.

How do I fix inaccessible boot device with USB?

Inaccessible boot device error can occur due to various reasons. One of the most common reasons is the accidental deletion of files from USB. If you are getting inaccessible boot device error while starting your computer, you can fix it by using a USB recovery drive.

You can create a USB recovery drive on another computer running the same version of Windows. To do so, open Control Panel and click on Recovery. Now, click on Create a recovery drive and follow the instructions.

Once you have created the recovery drive, insert it into the computer that is giving you the inaccessible boot device error. Boot your computer from the recovery drive. Now, you will see the recovery options. Click on Repair your computer.

SEE ALSO:  How To Fix My Credit On My Own

Next, click on Troubleshoot. Now, click on Advanced options. Finally, click on Command Prompt.

In the command prompt, type the following commands and press Enter after each command:

bootrec.exe /fixmbr

bootrec.exe /fixboot

bootrec.exe /rebuildbcd

After the commands have been executed, restart your computer. The inaccessible boot device error should be resolved.

How do I fix inaccessible boot device in Command Prompt?

There are times when the computer will not start up properly and will show an inaccessible boot device message. This can be frustrating, but there are ways to fix it.

The first thing to do is to try restarting the computer. If that doesn’t work, then you can try to fix it using the Command Prompt. To do this, you need to boot from the Windows installation media.

Once you have the Windows installation media, insert it into your computer. Then, restart your computer and press the key that corresponds to the media. For example, if you have a DVD, you would press the DVD drive key.

Once you are in the Windows installation media, select the language, time, and keyboard. Then, click on the Repair your computer link.

Next, select the Troubleshoot option.

Then, select the Advanced options.

Next, select the Command Prompt.

When the Command Prompt opens, type the following command and press Enter:

bootrec.exe /fixmbr

This will fix the MBR.

Next, type the following command and press Enter:

bootrec.exe /fixboot

This will fix the boot sector.

Finally, type the following command and press Enter:

bootrec.exe /RebuildBcd

This will rebuild the BCD.

If you have any problems, you can type the following command and press Enter:

SEE ALSO:  How To Fix Hook In Golf

bootrec.exe /ScanOS

This will scan your computer for operating systems.

How do I go into safe mode?

There are a few different ways that you can go into safe mode on your computer. 

One way is to restart your computer and hold down the Shift key while it’s restarting. 

Another way is to go into the System Configuration tool. To do this, press Windows+R to open the Run dialog box, type msconfig, and press Enter. In the System Configuration tool, go to the Boot tab and check the box for Safe Boot. Click OK, and restart your computer.

Another way to go into safe mode is to use the recovery environment. To do this, restart your computer and hold down the F8 key while it’s restarting. 

In safe mode, you can troubleshoot problems with your computer and remove viruses.

How do I select AHCI in BIOS?

When configuring your computer’s BIOS, you may need to select the AHCI mode to use the Advanced Host Controller Interface. This setting optimizes your computer’s hard drive performance.

To select the AHCI mode in BIOS, you may need to navigate to the SATA configuration or storage configuration menu. The specific steps to select this mode vary depending on your BIOS, but you should be able to find this option under the "Advanced" or "Storage" menu.

Once you have located the AHCI setting, you will need to enable it. This setting may be labeled as "AHCI," "SATA Mode," or "Storage Configuration." After you have enabled the AHCI mode, save your changes and exit BIOS.

Your computer will now boot into the Windows operating system using the AHCI driver. If you have any problems booting into Windows, you may need to reinstall the AHCI driver.

Leave a Reply

Your email address will not be published.